This is actually the second Sew Over It Eve Dress I’ve made. I made one other version for my mom but this is the first time that I made one for myself. Normally I grade out at the waist and hips since I’m usually a larger size at those points but for this dress I just made a straight size 8, which worked out perfectly. I did shorten the bodice by 1″ but I did not shorten the skirt to give it more of a midi length.
I love the flutter sleeves and the high low hem on this dress. The wrap is super comfortable and I really like that it makes the dress adjustable. That meant I didn’t have to worry too much about fit on this one!
I originally wanted to make this dress to wear to a wedding in August. I even included in my make 9 back in January. I was half way through making this dress when I found out that I actually needed to wear sage green to the wedding. I’m not in the wedding party so I thought I was free to wear whatever I want but apparently as the girlfriend of a family member of the groom I was expected to wear a certain color… so it was back to the drawing board for what to wear to the wedding. I’ll do another post soon on that 🙂
I really love this fabric. It is a rayon voile and I originally got it from Blackbird fabrics but it looks like they are sold out. I’ve seen it at other fabric stores since then though so you might be able to find it. I really like floral prints but I’ve struggled to find ones that aren’t too young looking and in colors that I like. This one definitely checked all of my floral fabric boxes! I have a little bit of this fabric left over so I’m going to need to figure out what else I can make out of what I have left over!
I already blogged by second version of my By Hand London Anna Dress so I figured it was about time to blog my first version! This version doesn’t get worn often but does get worn for special occasions. I’ll definitely end up wearing my second version more but I do really love this dress.
The Anna Dress bodice is very distinctive and after looking at many versions I had an idea of how I wanted the bodice to fit on my body. I made 3 muslins for the bodice to tweak the fit and I ended up making a lot of adjustments to the bodice. I ended up taking a lot of height out of the bodice front – probably about 1 1/2 inches. I also followed the back neckline tutorial on the Ginger makes blog to fix the gaping at the back. I ended up taking 3/4 inch out of each side of the back. I’m also short (5′ 2″) so I had to shorten the skirt by 8 inches!!! I made some fitting adjustments before making my second version and I’m really happy with the fit on that version.
I really took my time on sewing this dress. I used french seams on all the possible seams, and hand stitched many other areas (hem, slit opening, sleeve hems). I really love all of the beautiful finishing and I think that those touches really make the dress feel special. The directions do not have you interface the neckline facing and so I didn’t interface the facing on either this dress or my second dress but I wish I did go ahead and interface the neckline facing to help the facing lay flat and help the neckline keep its shape… Next time!
The fabric is the Lottie Floral Rayon from the miramar collection by workroom social. I recently used a different fabric from this line for my Grainline Studio Hadley top. In both cases I absolutely loved working with the fabric both times. I really love the coral color on this one paired with bright blue and dark teal.
While I don’t get to wear this dress often I did wear it to a Luau in Hawaii last summer and it was absolutely perfect.
I’ve made several Ogden Camis in the past. Basically any time I have enough fabric left over from my last project I make an ogden. I actually haven’t been wearing my ogdens that much this summer and at this point I have a ton of them so I may need to find another pattern soon that will use such a small amount of fabric. I do love layering my ogdens so I actually think I get more wear out of them in cooler months.
This one is made out of scraps left over from my Zadie Jumpsuit (both of which are made out of the mora slub linen viscose blend from Stonemountain and Daughter). I had just barely enough fabric to cut this out and ended up cutting one of the lining pieces on the cross grain, which seems to have worked out ok in this fabric!
Even though I’ve made several ogden cami’s in the past this time I cut a size 0 which is a size down from the ones I’ve made in the past. I’ve changed shape a little since my first ogden cami so I definitely needed to size down. Maybe I’ll end up wearing this version more because the fit is much better than my previous ogdens.
Speaking of my previous ogden cami’s, heres all the ogdens I’ve made:
- Black and White ogden
- Liberty ogden, Chambray ogden and Red Floral ogden all in one post
- Tropical ogden dress hack
I’ve been loving my first Zadie Jumpsuit but since its Summer I wanted a shorts version. I made this version out of the sandwashed rayon from Stonemountain and Daughter. I really love this fabric! It is so comfortable to wear and I love the slight color variations. Also – I used 2 yards of fabric for the shorts version cut single layer (size 6 at the bust size 8 at the hips).
I made a lot of changes from my first version. I took an additional 1/2″ from the length of the bodice. I also sized down one size in the legs. I drafted a facing instead of bias tape to finish the neckline opening. In order to do this I also added 3/8″ seam allowance to the neckline. I interfaced my facings, the pocket openings on the front pant, waist ties and either side of the slit in the seam that the waist tie goes through. I also stay stitched before starting any of the other steps. I stay stitched the front and back bodice neckline, the pocket side of the pocket opening and the back crotch seam. Because I wanted to make the shorts version but I wasn’t sure how much I would need to shorten them I gave myself 9″ down from the crotch (which was too much – next time I’d probably give myself 7″ which will still be plenty).
The first version I made I pretty much followed the instructions as they were written but for this version I went more with my gut on the order to do things. For example some of the seams I serged the raw edge on before sewing the seam instead of sewing the seam and then serging the edges separately. I love the end result of both versions but this version definitely took more time to make (re:interfacing). I hope the changes I made will help it stand the test of time because I love this romper and I want to wear it until I’m 100 years old at least.
What do you think? Do you follow pattern instructions exactly as they were written or do you just follow your instinct when sewing the pattern together? I’m definitely the type of person who likes to follow directions exactly so I felt like a bit of a rebel doing things my own way on this one but it felt GOOD!
This post is going to be a 2 for 1 but I’ve made both of these patterns before! I made the Grainline Studio Willow Tank and the Closet Case Patterns Ginger Jeans as shorts. I’ve made two versions of the willow tank before (a cropped version and a regular version) and I’ve made three pairs of Ginger Jeans before. Version one is the high waisted version. I actually used left over denim from that version to make these shorts so its a pretty interesting comparison to see how far I’ve come since my first Ginger Jeans! Version two and version three are both the low rise version.
Don’t tell my other willow tanks but this version is by far my favorite. The fabric just hangs away from my body and is so light and airy. It feels amazing to wear and I’m sure this is going to get lots of wears! I used the Loominous fabric by Anna Maria Horner. The design is completely woven in to the fabric!
Just look how cool that fabric is! I got this fabric from a local quilting shop and they didn’t quite have enough fabric but I made it work and was able to fit it all on the fabric I had.
I’ve made the high rise Ginger Jeans and two pairs of low rise but I’ve been wanting something more in the middle so I decided I wanted to try the mid-rise version. Since I’ve been struggling a bit with the fit I wanted to make a short muslin of the mid-rise before I go for the full length jeans. These shorts are definitely my best fitting pair so far but I’m still struggling with the crotch. This fabric does stretch out throughout the day and is a bit thinner and with a higher sheen than the cone mills denim I used for my other pairs so it definitely shows the wrinkles more. Other than that they fit pretty well though… I’m thinking that I might try the Megan Nielsen Ash Jeans though to see if those have the same issues with the crotch. Have any of you tried the ash jeans? From pictures it seems like people aren’t having as many crotch issues but it also calls for fabric with more stretch…
I adjusted the back yoke since my last pair and they are fitting much better in that area! I feel like I’m really close on getting this pattern to fit exactly how I want it to but I’m also a bit discouraged that after 4 versions I still haven’t figured out the crotch… I took apart a pair of ready to wear jeans that were threadbare and I’m hoping to compare those to my pattern for the Ginger Jeans that I’ve been adjusting and the Ash Jeans and then decide what my next step will be.